1 files changed, 0 insertions, 83 deletions
diff --git a/PIC/tb_pic.vhd b/PIC/tb_pic.vhd
deleted file mode 100644
index 067e154..0000000
--- a/PIC/tb_pic.vhd
+++ /dev/null
@@ -1,83 +0,0 @@
-library ieee;
-use ieee.std_logic_1164.all;
-use ieee.numeric_std.all;
-use work.read_intel_hex_pack.all;
-
-entity tb_pic is
-end entity tb_pic;
-
-architecture behavioural of tb_pic is
-  constant T_clk   : time   := 20 ns;  -- 50M
-  constant HEX_FILE : string := "program.hex";
-  constant SIM_CYCLES : integer := 800_000;
-
-  signal clk    : std_logic := '0';
-  signal reset  : std_logic := '1';
-  signal opcode : std_logic_vector(13 downto 0);
-
-  signal program_counter    : std_logic_vector(12 downto 0);
-  signal instruction_return : std_logic;
-  signal work_reg           : std_logic_vector(7 downto 0);
-  signal status             : std_logic_vector(2 downto 0);
-  signal port_a             : std_logic_vector(7 downto 0);
-  signal port_b             : std_logic_vector(7 downto 0);
-
-  signal done : boolean := false;
-
-  signal uart_tx : std_logic;
-  signal uart_rx : std_logic := '1';  -- idle high (no incoming bytes)
-
-  -- program memory: 1024 x 14-bit
-  signal prog_mem : program_array := (others => (others => '0'));
-
-begin
-
-  clk <= not clk after T_clk / 2 when not done else unaffected;
-
-  -- drive opcode from program memory using PC
-  opcode <= prog_mem(to_integer(unsigned(program_counter)));
-
-  dut : entity work.PIC(rtl)
-    generic map (
-      CLK_FREQ => 50_000_000   -- 10 MHz, matches T_clk = 100 ns
-    )
-    port map (
-      clk                => clk,
-      reset              => reset,
-      opcode             => opcode,
-      program_counter    => program_counter,
-      instruction_return => instruction_return,
-      work_reg           => work_reg,
-      status             => status,
-      port_a             => port_a,
-      port_b             => port_b,
-      uart_tx            => uart_tx,
-      uart_rx            => uart_rx
-    );
-
-  stimulus : process is
-    variable mem : program_array;
-  begin
-    -- load hex file into program memory
-    read_ihex_file(HEX_FILE, mem);
-    prog_mem <= mem;
-
-    -- reset pulse
-    reset <= '1';
-    wait for T_clk * 2;
-    reset <= '0';
-
-    -- run for SIM_CYCLES instruction cycles
-    for i in 0 to SIM_CYCLES - 1 loop
-      wait until rising_edge(clk);
-    end loop;
-
-    report "simulation done. port_a=" & integer'image(to_integer(unsigned(port_a)))
-      & " port_b=" & integer'image(to_integer(unsigned(port_b)))
-      severity note;
-
-    done <= true;
-    wait;
-  end process stimulus;
-
-end architecture behavioural;